Recent advances in electrochemical sensors for antibiotics and their applications

The abuse of antibiotics will cause an increase of drug-resistant strains and environmental pollution,which in turn will affect human health.Therefore,it is important to develop effective detection techniques to determine the level of antibiotics contamination in various fields.Compared with traditional detection methods,electrochemical sensors have received extensive attention due to their advantages such as high sensitivity,low detection limit,and good selectivity.In this mini review,we summarized the latest developments and new trends in electrochemical sensors for antibiotics.Here,modification methods and materials of electrode are discussed.We also pay more attention to the practical applications of antibiotics electrochemical sensors in different fields.In addition,the existing problems and the future challenges ahead have been proposed.We hope that this review can provide new ideas for the development of electrochemical sensors for antibiotics in the future.     

A Novel Carbon Nitride Nanosheets-based Electrochemical Sensor for Determination of Hydroxychloroquine in Pharmaceutical Formulation and Synthetic Urine Samples

This study introduces modified carbon paste electrodes with carbon nitride nanosheets (CNNS) and outlines their application for the determination of hydroxychloroquine sulfate (HCQ) in tablets and synthetic urine samples. CNNS were synthesized by hydrothermal route (200 °C, 10 h) using melamine and citric acid as their precursors. The carbon nitride nanosheets-based electrode (CNNS/E) presented a linear dynamic range for HCQ (LDR), ranging from 10.0 nmol l⁻¹ to 6.92 μmol l⁻¹, and detection (LOD) and quantification limits (LOQ) of 0.16 nmol l⁻¹ and 0.52 nmol l⁻¹, respectively. LOD and LOQ were calculated by the equations: LOD=3(S_d/b), and LOQ=10(S_d/b). The modified sensor presented excellent relative standard deviations for parameters such as repeatability (2.39 % and 1.87 %) and reproducibility (3.22 % and 2.32 %) in HCQ oxidation peaks (1 and 2). The CNNS/E has not shown significant variations in its anodic signal intensity in the presence of some organic and inorganic substances. It is worth bearing in mind that CNNS/E can be easily manufactured and the sensor has the lowest HCQ detection limits reported so far. The proposed sensor was successfully applied for HCQ determination in tablets and synthetic urine, showing good recovery values and an error of 0.60 % about comparative method in tablet samples, assuring the quality of the method.     

An Efficient Novel Electrochemical Sensor for Simultaneous Determination of Vitamin C and Aspirin Based on a PMR/Zn-Al LDH/GCE

A sensitive, low-cost, and simple electrochemical sensor based on Zn−Al layered double hydroxide (Zn−Al LDH) combined with a polymer film of methyl red (PMR) to modify a GCE has been created for the first time. Using cyclic voltammetry (CV), the electrochemical characteristics of the newly fabricated sensor were investigated. The characterised PMR/Zn−Al LDH/GCE shows high electro-catalytic activity towards the vitamin C (AA) and aspirin (ASA) oxidation. Schematic fabrication of PMR/Zn−Al LDH/GCE for the determination of AA or ASA was presented. The new sensor demonstrated superior analytical efficiency for the simultaneous identification of AA and ASA traces in well-spaced anodic peaks, even in the presence of certain intervening species. According to experimental results, the fabricated sensor represented two well-separated oxidation peaks for AA and ASA oxidation with potential difference of 799 mV (vs. Ag/AgCl). The linear dependences of the anodic peak currents of AA and ASA on their concentrations in the ranges of 0.10–53.17 μM are good. The detection limits of AA and ASA at the PMR/Zn−Al LDH/GCE were found to be 1.26 and 1.27 μM, respectively. Meanwhile, the quantification limits of AA and ASA were calculated as 4.21 and 4.25 μM, respectively. On other hand, the limit of detection (LODs) of AA and ASA oxidation were determined to be 0.47 and 0.21 μM, respectively, according to DPV method. The effect of scan rate (100 to 800 mV/s) on the anodic peak currents of AA and ASA was examined. A sensing model mechanism has been suggested and discussed in detail. Finally, the proposed sensor displayed a good reproducibility, stability and selectivity. The developed sensor was eventually used to successfully detect AA and ASA in urine samples.     

Determination of Paracetamol Based on 3-Amino-4H-1,2,4-triazole Coated Glassy Carbon Surface in Pharmaceutical Sample

In this present study, to determine paracetamol, an electroanalytical method is presented using differential pulse voltammetry (DPV) at 3-amino-4H-1,2,4-triazole (3AT) coated glassy carbon (GC) electrode. The electrochemical characterization and electron transfer behavior of this prepared electrode in the mixture of K₄[Fe(CN)₆]/K₃[Fe(CN)₆] contains 0.1 M KCl was confirmed by using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods. Furthermore, scanning electron microscopy (SEM) was used to observe morphological structures of the bare and modified surfaces. The effect of pH was studied on the redox reaction of paracetamol in phosphate buffer in the range of pH 3.0–9.0. The limit of detection was 0.043 μM (3 s/m) for 3AT-GC electrode. The developed electrode was successfully utilized in pharmaceutical samples.     

Voltammetric Analysis of Oxymetazoline Hydrochloride at Zeolite – Modified Carbon Paste Electrode in Micellar Medium

Simple, sensitive, accurate and inexpensive differential pulse (DPV) and square wave (SWV) voltammetric methods utilizing zeolite modified carbon paste electrode (ZMCPE) were developed for the determination of Oxymetazoline hydrochloride (OXM) in nasal drops. Various experimental parameters were optimized using cyclic voltammetry (CV). Calibration curves were linear over the concentration ranges 9.8×10⁻⁸–3.6×10⁻⁶ M and 9.8×10⁻⁶–9×10⁻⁵ M for DPV and SWV, respectively. The DPV method showed a limit of detection (LOD) of 1.04×10⁻⁷ M. The method was applied for the determination of OXM in pharmaceutical formulation with an average recovery of 101.18 % (%RSD=0.41, n=9).     

Bimetallic CuCo Derived from Prussian Blue Analogue for Nonenzymatic Glucose Sensing

Bimetallic CuCo composites are prepared by calcinating copper hexacyanocobaltate precursor in N₂ atmosphere. The CuCo modified electrodes are fabricated for nonenzymatic glucose sensing in the alkaline electrolyte. The glucose can be directly electro-oxidized on the surface of the electrode catalyst mediated by the redox couples of Cu and Co. The optimal glucose sensor exhibits a high sensitivity (567 μA ⋅ mM⁻¹ ⋅ cm⁻²) in the range up to 825 μM with a detection limit of 3 μM and acceptable selectivity. The sensor can also be applied in serum samples. This work provides a facile and easily-scalable synthesis method of electrocatalysts for nonenzymatic glucose sensors.     

改性生物炭对废水中锑的去除研究进展

废水锑排放限值日趋严格,迫切需要高效低成本的废水锑去除技术。本文介绍了含锑废水较为成熟的处理技术和工艺,然后结合生物炭的制备和特点综述了改性生物炭技术应用于废水中锑的去除治理所具有的明显优势和现阶段所取得的研究成果,为改性生物炭技术用于废水中锑的去除应用和推广提供一定的参考。     

机械剥离石墨烯修饰电极检测食品接触材料中双酚A的迁移量

采用机械剥离石墨烯修饰电极快速检测食品接触材料中双酚A的迁移量。X射线电子衍射表征显示机械剥离石墨烯表面不存在含氧官能团,与化学还原石墨烯相比,机械剥离石墨烯对双酚A具有更好的电催化性能,降低了双酚A的氧化过电位,提高了电流响应。在优化的试验条件下,双酚A的浓度在1.0×10-7~1.5×10-5mol·L-1范围内与氧化峰电流呈线性关系,检出限(3S/N)为3.0×10-8mol·L-1。采用该电极对食品模拟物中的双酚A进行检测,加标回收率在85.1%~104%之间,测定值的相对标准偏差(n=6)在2.7%~5.9%之间。     

Amperometric Folic Acid Quantification Using a Supramolecular Tetraruthenated Nickel Porphyrin µ‐Peroxo‐Bridged Matrix Modified Electrode Associated to Batch Injection Analysis

A supramolecular Nickel (II) porphyrin complex containing four pyridyl‐bis(2,2′‐bipyridyl)chloro ruthenium meso substituents was submitted to successive voltammetric cycles in high alkaline media to produce a supramolecular matrix with Nickel centers linked by µ‐peroxo bridges, producing a highly stable thin film able to act as redox mediator for electrocatalytic oxidation of folic acid. The characterization of electrode surface material was performed by Scanning Electron Microscopy and Electrochemical Impedance Spectroscopy. The modified electrode was inserted into a batch injection electrochemical cell used for the rapid and precise quantification of folic acid in pharmaceutical products. The favorable hydrodynamic conditions provided by amperometry‐BIA association allowed a very high throughput with good linear range (1 to 200 µmol L^?1) and low detection limit (7.37×10^?7 mol L^?1). The electrochemical method was applied to the quantification of folic acid in different tablet samples. The results were comparable with values indicated by the manufacturer and those found using high HPLC according to the Brazilian Pharmacopoeia; commercial samples were submitted to a procedure in order to remove lactose of tablets, since carbohydrates act as interfering species. This procedure together with the electrochemical method showed to be simple, rapid, efficient and an appropriate alternative for quantifying this compound in real samples.